The installation techniques and key points of these electronic remote water meters need to be mastered!

Electronic remote water meters, as a new type of water meter, are being adopted by more and more cities. Compared to traditional mechanical water meters, it has the advantages of high reading accuracy, strong anti-interference ability, and long service life. However, its installation also requires some skills and key points, especially the following installation skills and key points to master.

Firstly, the installation personnel need to choose the appropriate water meter model based on the on-site environment. Water meters are generally classified by caliber, such as DN15, DN20, DN25, etc. When selecting a model, it is necessary to determine which caliber to use based on the measured water flow rate to avoid problems such as inaccurate measurement accuracy or damage to the water meter caused by improper installation.

Secondly, the installation personnel should install the electronic remote water meter in a ventilated, dry, and droplet free place. Because there are some electronic components inside the water meter that are easily affected in humid environments, resulting in inaccurate or damaged measurement data. At the same time, in order to make the readings more accurate, it is also necessary to ensure that there is no blockage or leakage between the water meter and the water pipe during installation.

Thirdly, installing water meters requires the use of professional tools and standardized installation standards. Before installation, the installation personnel need to be familiar with the installation method and principle of the water meter, and strictly follow the relevant standards for operation. For example, during installation, it is important to use a sealing ring at the connection between the water meter and the water pipe, and tighten it as required to ensure that there is no water leakage.

Fourthly, testing should be conducted after installation. After installation, testing is required to ensure the accuracy and normal operation of the electronic remote water meter. Testing should include two stages:

One is to test under static conditions. After installing the water meter, it should remain still for a period of time to see if it can maintain the accuracy and normal operation of the water meter; The second is to test the water meter under dynamic conditions, using different water flow rates, such as high or low water flow, to verify whether its readings are accurate and can operate normally.

After ensuring the accurate installation of the water meter, it is necessary to conduct regular inspections and maintenance. The inspection is mainly to prevent some dirt or garbage from entering the water meter and causing blockage or damage, resulting in unnecessary costs; Maintenance can ensure its service life and measurement accuracy. Inspection and maintenance should be carried out regularly, and it is generally recommended to have a frequency of once every six months or once a year.

Electronic remote water meters, as a new type of water meter, have many advantages. Only when installed correctly can there be a satisfactory user experience. Therefore, when installing, it is necessary to pay attention to some skills and points to ensure its accuracy and normal operation, so that the water meter can accurately record the water consumption during the water use period.